
Active and Passive Fiber Optic Devices
Active Fiber Optic Devices.
Active devices are components that require electric current to work. The following are examples of active devices.
a). Managed Switch

This type of switch has reliable features that support switch performance in computer networks and is equipped with popular features, namely Virtual LAN (VLAN), which allows the switch to connect to LAN segments simultaneously and be used by more than one LAN, and a monitoring feature that can configure IP addresses and even check data transfers via IP address, via the SNMP protocol, or via other monitoring programs.
b). Media Converter

This active device is a network device that can connect two different types of networks through media such as twisted pair with fiber optic cable. There are two types of media converters based on the type of fiber optic cable:
- Single Mode, with a range of up to 100 km at a wavelength of 1550 nm and a 9/125 micron core.
- Multimode, with a limited range of at most 550 meters at a wavelength of 1300 nanometers and a 50/125 micron core, usually used for local networks.
c). Optical Network Unit (ONU)

This ONU provides interface between the optical network and the customer. The optical signal transmitted through the ODN is converted by the ONU into the electrical signal required for service customer. In the FTTx architecture, the ONU is placed on the customer side. It has several functions, namely:
- Converts optical signal services into electrical signals.
- Serves as a service demultiplexer.
- The output can be voice, video, and internet data.
d). Passive Optical Network (PON)

A fiber-optic-based point-to-multipoint network with an optical splitter element that distributes data to several destinations. The splitter is passive, meaning it does not manipulate the signal, such as amplifying the optical signal, which is done in the OLT.
The characteristics of PON are as follows:
- The technology used is WDM, wavelength division multiplexer, which enables various services to use a single cable line.
- Downstream and upstream signals are two signals with different wavelengths that pass through the same path. The signals are separated and recombined at the ends of the network, both at the provider and at the customer.
- Has high bandwidth and long distance (20 km - 30 km) and is commonly used for metro networks or mobile backhaul, i.e., connections between core networks.
- There are two standards: ITU (GPON) and IEEE (GE-PON).
Gigabit Passive Optical Network (GPON)

One of the PON technologies developed by ITU-T through G.984. The G.984 standard supports higher bit rates, improved security, and a choice of layer 2 protocols (ATM, GEM, or Ethernet). Signal distribution from the central office to the end user uses passive splitters (1:2, 1:4, 1:8, 1:16, 1:32, 1:64).
GPON components consist of:
- Optical Line Terminal (OLT)
- Optical Distribution Network (ODN)
- Optical Network Unit (ONU) atau Optical Network Termination (ONT)
- Network Management System, software for controlling and configuring GPON devices. Configurable items include the OLT and ONU/ONT.
Characteristics of GPON:
- Based on TDMA (time division multiple access), thus supporting T1, E1, and DS3.
- Downstream at 2.488 Gbps uses a broadcast technique and upstream at 1.244 Gbps uses TDMA as the upstream multiple access.
- The downstream wavelengths used are 1490 nm for data and VoIP, and 1550 nm for delivering IPTV.
- The upstream wavelength used is 1310 nm for triple play services.
Gigabit Ethernet Passive Optical Network (GE-PON)

A high-speed optical access technique standardized under IEEE 802.3ah EFM (Ethernet in the First Mile) so that it can be used in point-to-multipoint configurations. Signal distribution from the central office to the end user uses passive splitters (1:2, 1:4, 1:8, 1:16, 1:32).
GPON components consist of:
- Optical Line Terminal (OLT)
- Optical Distribution Network (ODN)
- Optical Network Unit (ONU) atau Optical Network Termination (ONT)
- Network Management System, software for controlling and configuring GEPON devices. Configurable items include the OLT and ONU/ONT.
Characteristics of GE-PON:
- Uses an Ethernet encapsulation structure for layer 2 communication.
- Data is sent with a variable length of 1,518 bytes according to the IEEE 802.3ah standard.
- Point-to-multipoint structure, in which one OLT can be connected to 32 ONUs, and each ONU shares 1G bandwidth via TDM in both uplink and downlink.
- Has an upstream of 1.260 Gbps with a wavelength of 1,360 nm and a downstream of 1.480 Gbps with a wavelength of 1,500 nm.
- Supports encryption technology on both downstream and upstream.
- Supports the DBA (dynamic bandwidth allocation) function, the ability to manage the bandwidth load of each ONU and set one type of delay, either low delay or normal delay. Low delay is usually used for VoIP or video communication and also for QoS features.
- Supports the physical layer OAM (operation, administration and maintenance) function, the ability to perform required operations and to administer and maintain the fiber optic network system.
e). Optical Line Terminal/OLT

A device that serves as the starting point of a passive optical network service. Its main functions include:
- Converting between the electrical signals used by the service provider and the optical signals used by the passive optical network
- Coordinating multiplexing on other devices at the end of the network, commonly called the Optical Network Terminal (ONT) or Optical Network Unit (ONU)
- Connection to service centers (softswitch, ISP, and IPTV)
- Distribution point to customers
- Place for bandwidth management, control, and management of the customer network
The OLT provides an interface between the Passive Optical Network (PON) system and data, video, and voice/telephone service providers through the NSM. OLT devices include:
- DCS (Digital Cross-connect), which serves nonswitched and non-locally switched TDM traffic to the telephone network
- Voice Gateway, which serves locally switched TDM/voice traffic to the PSTN
- IP Routers or ATM Edge Switch, which serves data traffic
- Video Network Device, which serves video traffic
f). Small Form-factor Pluggable (SFP)

A compact device in the form of a hot-pluggable transceiver commonly used in data communication and telecommunication applications. Its form factor and electrical interface are specified by a multi-source agreement (MSA). This device serves as the interface between a network device motherboard, commonly used in a router or switch, and a fiber optic or copper network cable. It is designed to support communication standards on SONET, Gigabit Ethernet, Fibre Channel, and other networks. There are 2 types of SFP:
- SFP, with a maximum bandwidth of 4 Gbps
- SFP+, with a maximum bandwidth of 10 Gbps
Passive Devices Fiber Optic.
Passive devices are components that do not require electric current to work.
The following are some examples of devices used as passive components
a). Pigtail

A piece of cable with one connector at its end; pigtail will be spliced to a fiber cable that does not yet have a connector.
b). Patch Cord

Cable fiber optic with connectors on both sides. A patch cord is used to connect devices and is also known as an optic jumper.
c). Fiber Outlet

A kind of housing for storing fiber optic pigtails that are spliced to the drop cable.
d). DPFO/ODP

DPFO (Fiber Optic Distribution Point) / ODP (Optical Distribution Point) is the place for splitters and drop cable terminations leading to users.
e). Splitter

A fiber optic component that separates or divides optical power from one input fiber into two or more output fibers. The drawback of this splitter is that it causes loss: the larger its capacity, the greater the loss.
f). Joint Box/Joint Closure

A splice / termination point for 2 or more fiber optic. Usually installed outdoors.
g). OTB

Optical Termination Box (OTB) is the termination point of a fiber optic cable outdoor with fiber optic cable indoor.
Well, that is more or less about Active and Passive Fiber Optic Devices. Let's get to know our study program better Bachelor of Telecommunication Engineering and visit the official website Telkom University Jakarta Campus yes!
Written by Dzul Rahman